Decoding Assessment Validation: Guide to Validating Assessments
Decoding Assessment Validation: Guide to Validating Assessments
Blog Article
Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.
Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The initial validation type checks that your RTO's assessments align with the training package requirements.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
Understanding the Two Types of Assessment Validation
An Overview of Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This piece will highlight assessment tool validation.
Conducting Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
When is Assessment Tool Validation Conducted?
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- resources get updated
- add new training products on scope
- training product updates are reviewed against your course
- when learning resources are identified as a risk during your risk assessment
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
Which Training Products Should You Validate?
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
What Do You Need for Assessment Tool Validation?
Learning Materials
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Validation Committee
Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.
Together, your validation panel should possess:
Relevant vocational competencies and up-to-date industry skills for the unit being validated
Recent knowledge and skills in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.
It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Essential Rules of Evidence
Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Despite these being frequently addressed in VET professional development and nationally recognised training, heaps of tools still have problems with these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Lead by Example
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappy changing
bottle preparation, bottle-feeding infants, and cleaning Assessment validation Australia equipment
prepare solid food and feed babies
respond suitably to baby signs and cues
prepare babies for sleep and soothe them
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Total or Not Competent
Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
Answers may include:
Required resources
Relevant costs
Time allocated for activities
Appointed roles and responsibilities
If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Answers may include, but are not necessarily limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering, administrative controls
Equipment or machinery – isolation, engineering, administrative controls
Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.